Table of Contents
Advertisement
Side stand monitoring faulty
lights up yellow.
Side stand monitor-
ing faulty. Onward
journey possible. Stop
engine when stationary!
Have checked by work-
shop.
Possible cause:
The side support switch
or its wiring is damaged
The engine is turned off if the
speed falls below the mini-
mum limit. The journey can-
not be continued.
min 3 mph (min 5 km/h)
Contact a repair shop,
preferably an authorized
BMW Motorrad retailer.
ABS self-diagnosis not
completed
blinks.
Possible cause:
ABS self-diagnosis rou-
tine not completed
ABS is not available, as the
self-diagnosis routine was
not completed. (The motor-
cycle must reach a specified
minimum speed before the
system can check operation
of the wheel speed sensors:
3 mph (5 km/h))
Ride off slowly. Please note
that the ABS function is only
available after the self-diagno-
sis has completed.
ABS fault
lights up yellow.
lights up.
Limited ABS avail-
ability! Onward
journey possible.
Ride carefully to next
specialist workshop.
Possible cause:
The ABS control unit has
detected an error. The
partial integral brake and the
Dynamic Brake Control function
have failed. The ABS function
is limited.
It remains possible to con-
tinue riding. Observe addi-
53
Advertisement
Chapters
Table of Contents
