Table of Contents
Advertisement
212
MAINTENANCE
Insulate the negative battery
cable 1 with adhesive strip.
Pull the retaining plate at po-
sition 1 outward and remove
it upward.
Lift battery slightly out of
holder sufficiently for posi-
tive terminal to be accessible.
Disconnect the positive bat-
tery cable 1 and pull out the
battery.
Installing a battery
If the 12 V battery is in-
stalled incorrectly or the
terminals are reversed (e.g.
when jump starting), it can
burn through the fuse for the
alternator regulator.
Fasten the positive battery
cable 1.
Wiring harness on bat-
tery
M6 x 11
6 lb/ft (8 Nm)
Slide battery into holder.
Advertisement
Chapters
Table of Contents
