Table of Contents
Advertisement
146
RIDING
ABS self-diagnosis completed
The ABS indicator and warn-
ing light goes out.
ABS self-diagnosis rou-
tine not completed
ABS is not available, as the
self-diagnosis routine was
not completed. (The motor-
cycle must reach a specified
minimum speed before the
system can check operation
of the wheel speed sensors:
3 mph (5 km/h))
If an ABS error is displayed af-
ter the ABS self-diagnosis is
completed:
You may continue riding. Bear
in mind that neither the ABS
function nor the integral func-
tion is available.
Have the malfunction
corrected as soon as possible
at a specialist workshop,
preferably an authorized
BMW Motorrad retailer.
DTC self-diagnosis
The self-diagnosis routine
is determining whether
BMW Motorrad DTC is ready
for operation. The self-diagno-
sis runs automatically when you
switch on the ignition.
Phase 1
Checking system components
capable of diagnosis while
vehicle is at a standstill.
flashes slowly.
Phase 2
Checking system components
capable of diagnosis while
riding off.
flashes slowly.
DTC self-diagnosis completed
The DTC icon is no longer
displayed.
Watch all indicator lights on
the display.
DTC self-diagnosis not
completed
The DTC function is not
available, as the self-diagnosis
function has not been
completed. (To check wheel
speed sensors, motorcycle
must reach a minimum speed
with engine running: min
3 mph (min 5 km/h))
If a DTC fault is displayed after
the DTC self-diagnosis is com-
pleted:
You may continue riding.
Please note that the DTC
Advertisement
Chapters
Table of Contents
