206
MAINTENANCE
Remove the spring clip 1
from the lock and fold it to
the side.
Remove the lamp 2.
Replace the defective light
source.
Bulbs for low-beam
headlight
without headlight control
LED
with
OE
headlight control
H7 / 12 V / 55 W
Bulb for high-beam
headlight
without headlight control
LED
with headlight control
H7 / 12 V / 55 W
To avoid leaving contamina-
tion deposits on the new bul-
b's glass surface, always hold
it by its base.
Insert the lamp 2, making
sure the lug 3 is in the cor-
rect position.
tration.
Insert the spring clip 1 into
the lock.
OE
OE
Connect plug 1.
OE
Position cover panel and in-
stall it by turning clockwise.
Replacing the bulbs for
parking lights
with headlight control
Park the motorcycle, making
sure the ground is level and
firm.
The alignment of the bulb
may differ from the illus-
OE