Table of Contents
Advertisement
50
DISPLAYS
WARNING
Tire pressure is outside the
approved tolerance range.
Risk of accident, deterioration
in the handling characteristics
of the vehicle.
Adjust the driving style.
Possible cause:
The measured tire pressure
is outside of the permissible
tolerance.
Check tire for damage and
ridability.
If the tire is still ridable:
Correct the tire pressure at
the next opportunity.
Before adjusting the tire pres-
sure, check the information
on temperature compensation
and tire pressure adjustment
in the Technology in detail
chapter:
with tire pressure monitor
(TPM)
OE
Temperature compensation
(
175)
with tire pressure monitor
(TPM)
OE
Tire pressure adjustment
(
175)
Have the tire checked by a
specialist workshop for dam-
age, preferably by an autho-
rized BMW Motorrad retailer.
The RDC warning mes-
sage can be deactivated
for off-road operation.
If you are unsure about the
tire's ridability:
Do not continue riding.
Contact roadside service.
Transmission fault
"
"
---
Possible cause:
The motorcycle has not
reached the minimum speed
(
174).
RDC sensor is not active
min 19 mph (min 30 km/h)
(The RDC sensor does not
transmit a signal to the mo-
torcycle until this minimum
speed has been exceeded.)
Watch the TCP/RDC display
at a higher rate of speed.
A continuous error is only
present if the general warn-
ing lamp also lights up. In this
case:
Have fault eliminated at a
specialist service facility,
preferably an authorized
BMW Motorrad retailer.
Advertisement
Chapters
Table of Contents
