128
SETTING
180° and installing it in posi-
tion A or B.
Remove screw 1.
Clean the thread.
Install the foot plate 2 in posi-
tion A or B as desired.
Turn the foot plate 2 into the
desired position.
Install the new screw 1.
Foot piece on footbrake
lever
M6 x 20
Thread-locking compound:
micro-encapsulated
7 lb/ft (10 Nm)
SHIFTING
Adjusting the gearshift lever
Loosen screw 1.
Turn the foot plate• 2 to the
desired position.
If the toe piece is set too
high or too low, this can
cause problems when shifting
gears. In the event of shifting
problems, check the toe piece
setting.
Tighten screw 1 to the speci-
fied torque.
Treadplate (fixing) on
gear lever
M6 x 16
6 lb/ft (8 Nm)