200
MAINTENANCE
Quick-release axle in
telescopic fork
M12 x 20
22 lb/ft (30 Nm)
Tighten left-hand axle clamp-
ing screw 2 to the specified
torque.
Clamping screw for
quick-release axle in
telescopic fork
M8 x 35
14 lb/ft (19 Nm)
Tighten right-hand axle
clamping screw 1 to the
specified torque.
Clamping screw for
quick-release axle in
telescopic fork
M8 x 35
14 lb/ft (19 Nm)
Remove the front wheel
stand.
Put the brake calipers on the
left and right onto the brake
disks.
Install mounting bolts 4 on
left and right to the specified
torque.
Brake caliper on tele-
scopic forks
M10 x 65
28 lb/ft (38 Nm)
Remove adhesive tape from
wheel rim.
WARNING
Brake pads do not contact
the brake disc
Risk of accident due to de-
layed braking effect.
Before driving off, check
that the braking effect kicks
in without any delay.
Engage the brakes repeatedly
until the brake pads make
contact with the discs.