Bluetooth connection is not established.
Possible cause
Necessary pairing steps were
not performed.
The communication system is
not connected automatically
despite successful pairing.
Too many Bluetooth devices
are stored in the helmet.
There are additional vehicles
with Bluetooth-capable devices
nearby.
Bluetooth® connection is faulty.
Possible cause
Bluetooth connection to the
mobile end device is inter-
rupted.
Bluetooth connection to the
helmet is interrupted.
Volume in the helmet cannot
be adjusted.
Remedy
Refer to the operating
instructions of the communica-
tion system for the necessary
steps for pairing.
Switch off the communication
system of the helmet and con-
nect again after one to two
minutes.
Delete all pairing entries in
the helmet (see the operating
instructions of the communica-
tion system).
Avoid simultaneous pairing
with multiple vehicles.
Remedy
Switch off energy saving
mode.
Switch off the communication
system of the helmet and con-
nect again after one to two
minutes.
Switch off the communication
system of the helmet and con-
nect again after one to two
minutes.
243