BMW Motorrad R 1250 GS Adventure 2022 Rider's Manual page 229

Remove case lid.
Installing the case lid
Put the case lid on the case.
Close one closure of the case
lid.
Open the case lid toward the
closed side.
Attach the lid-retaining ca-
ble 1.
Close the case lid.
Close the second closure of
the case lid.
Removing a case
Turn key 1 counterclockwise.
Push the lock housing 2 to
the side to unlock the locking
claw 3.
Pull locking claw 3 to the side
while holding the case in po-
sition.
Pull the case forward up to
the stop and remove it side-
ways.
Attaching a case
Place case on case carrier
and slide backwards so that
mounts on case carrier 1 and
case 2 interlock.
Put the locking claw 1 on the
case carrier while holding the
case in position.
Push lock housing 2 to one
side, in doing so make sure
223