Automation; Keypad Manual; Set Triggers - Rosslare HomeLogix HLX-40 Installation And Programming Manual

Installer Menu
6.7

Automation

The sixth submenu is
automation options. Browse the desired automation related setting, as
described in detail below, using the Menu button. Press the Enter button to
access it.
6.7.1

Keypad Manual

Enable or disable this option to determine whether the PGM output can be
controlled by numeric keys 1 and 2 of the keypad as described in Section
2.2.1. This option is Enabled by default.
To set up the keypad:
1. Using the Menu button, Enable or Disable the option.
2. Press Enter to confirm your selection.
6.7.2

Set Triggers

This option enables you to activate the PGMs using various events in an
automated fashion. By default, no triggers are set.
To set up triggers:
Using the Menu button, select PGM1 or PGM2, and press Enter to
1.
confirm.
2. For each of the PGMs, you can select the pulse time and triggers as
described below:
Pulse time – Set the length of time for the device to stay on when a
a.
pulse type activation is selected. Using the numeric keypad, set the
time from 1 to 99 seconds and press Enter to save.
b. Select the trigger type and parameters according to the following
table:
Use only one trigger for each PGM simultaneously.
50
Automation
, which deals with the setup of various home
AUTOMATION
Keypad Manual
Set Triggers
HLX-40 Installer Manual