Rosslare HomeLogix HLX-40 Installation And Programming Manual
Advanced wireless security panel
Hide thumbs
Also See for HomeLogix HLX-40:
- Installation and programming manual (81 pages) ,
- User manual (58 pages) ,
- User manual (40 pages)
Related Manuals for Rosslare HomeLogix HLX-40
Summary of Contents for Rosslare HomeLogix HLX-40
- Page 1 2012 December HLX-40/40A/40B Advanced Wireless Security Panel Hardware Installation and Programming Manual...
- Page 2 ROSSLARE. ROSSLARE reserves the right to revise and change this document at any time, without being obliged to announce such revisions or changes beforehand or after the fact.
-
Page 3: Table Of Contents
Table of Contents Table of Contents 1. Introduction ..............10 General .................... 10 Special Features ................11 2. HLX-40 Quick Reference ..........12 The Panel ..................12 The Keypad ..................13 2.2.1 Keypad Operated Functions ............... 14 Sound Indicators ................15 LED Indicators ................... - Page 4 Table of Contents Connect the AC Transformer ............24 Connecting to a PC ................24 Mounting the Back Plate ..............25 4.8.1 General ..................... 25 4.8.2 Required Space ..................25 Dismounting the Control Panel ............26 4.10 Replacing the Backup Battery ............26 5.
- Page 5 Table of Contents 6.5.13 Bypass Option ................... 39 6.5.14 Quick Arm ....................39 6.5.15 Instant Arm ....................40 6.5.16 Panic Button ....................40 6.5.17 Duress Code ....................40 6.5.18 Alarm Cancel .................... 41 6.5.19 Alarm Abort Time ..................41 6.5.20 Backlight Time ...................
- Page 6 Table of Contents 6.9.5 Test Devices ....................55 7. User Menu Structure ............56 8. Reading the Event Log ........... 57 A. Sensor Placement and Helpful Reference Tables ..58 Default Zone Descriptions ..............58 Custom Zone Descriptions ..............59 Detector Deployment Plan ..............
- Page 7 List of Figures List of Figures Figure 1: HLX-40 ..................10 Figure 2: HLX-40A ..................11 Figure 3: HLX-40B ..................11 Figure 4: HLX-40 Panel ................. 12 Figure 5: HLX-40 Keypad ................13 Figure 6: Panel Wiring .................. 20 Figure 7: Resistors ..................21 Figure 8: Wiring to External Siren ..............
- Page 8 List of Tables List of Tables Table 1: Control Panel Functions ..............12 Table 2: Keypad Functions ................13 Table 3: Keypad Operated Functions............. 14 Table 4: Sound Indicators ................15 Table 5: LED Indicators ................. 15 Table 6: Resistor Color Scheme ..............21 Table 7: Resistors Provided ................
- Page 9 applicable, is subject to the terms of the license provided as part of the purchase documents. ROSSLARE ENTERPRISES LIMITED and/or its related companies and/or subsidiaries’ (hereafter:"ROSSLARE") exclusive warranty and liability is limited to the warranty and liability statement provided in an appendix at the end of this document.
-
Page 10: Introduction
Introduction Introduction General The HLX-40 panel by Rosslare is the perfect wireless security system for intrusion protection of the home, or small office providing security monitoring and VIP Voice messaging. Users receive the latest RF technology in a wide selection of advanced wireless sensors and remotes, and benefit from smooth and easy operation of a large number of security and communication options. -
Page 11: Special Features
Introduction Figure 2: HLX-40A Figure 3: HLX-40B Special Features 40 zones – 39 wireless zones, 1 wired zone – and tamper Supports 8 remote controls, 4 wireless sirens, 4 wireless keypads, and 4 repeaters Programmable remote control buttons Interactive telephone voice menu (voice interactive) ... -
Page 12: Hlx-40 Quick Reference
HLX-40 Quick Reference HLX-40 Quick Reference This chapter describes the control panel and the keypad, as well as the chimes emitted when the buttons on the keypad are pressed. The Panel Figure 4: HLX-40 Panel Power Menu Indicator Display Enter Status Indicator Keypad... -
Page 13: The Keypad
HLX-40 Quick Reference The Keypad Figure 5: HLX-40 Keypad Table 2 describes the keypad functions: Table 2: Keypad Functions Icon Press to Menu Navigate between User and Installer menus, and Normal mode. Navigate to the next menu or the next option within a menu. -
Page 14: Keypad Operated Functions
HLX-40 Quick Reference Icon Press to Ignore an entry or move one level up in a menu. 2.2.1 Keypad Operated Functions When the system is idle, the alphanumeric keys initiate the commands shown in Table 3. Table 3: Keypad Operated Functions Press To Memory Display Press once to display the alarms caused during the last arming period per... -
Page 15: Sound Indicators
HLX-40 Quick Reference Press To Play User Message Listen to voice messages Sound Indicators Table 4 presents the sounds emitted by the system and push buttons if enabled during programming. Table 4: Sound Indicators Sound Sounded when Single beep A key is pressed Long Beep There is an illegal key entry Three short beeps... -
Page 16: Specifications
Specifications Specifications This chapter provides the various specifications in regard to all three HLX-40 control panels. RF Data RF Data RF Unit Type Integrated RF transceiver (two-way) shielded super heterodyne, fixed frequency Antenna Type Printed PCB type antenna Operating 433.92 MHz G series Frequencies 868.35 MHz H series Receiver... -
Page 17: Environmental Data
Specifications Environmental Data Environmental Data HLX-40 HLX-40A HLX-40B Operation 0ºC to 60ºC (32ºF to 140ºF) temperature: Storage -25ºC to 70ºC (-13ºF to 158ºF) temperature: Relative 85% at 30ºC (non-condensing) humidity: Dimensions: 217 x 144 x 48 mm 217 x 144 x 50 mm 217 x 144 x 48 mm L x W x D 8.54 x 5.67 x 1.89 in. -
Page 18: Communication
Specifications Battery Internal backup battery: 800 mAh for 6 hours standby- not EN50131- 6 standard Internal backup battery: 2000 mAh for 14 hours standby Low battery detection under 10 V Maximum battery (2000mAh) recharge time 72 hours Communication ... -
Page 19: Installation
Installation Installation Unpacking the Equipment The contents of your package are listed below. First, make sure that all the items in the kit have been included. If you find that any item is missing, contact your dealer immediately. 4.1.1 HLX-40 Package Content ... -
Page 20: Wiring The Hlx-40
Installation 4.4.1 Wiring the HLX-40 Figure 6: Panel Wiring Input Description Siren Relay output for external siren or strobe. Normally open or normally closed for external siren contacts. AUX 1 Programmable AUX outputs 1 and 2, 200 mA Sink Current 12VDC open collector outputs Active Low. AUX 2 Ground ZONE... -
Page 21: Resistors
Stripes 1 and 2 represent numbers that together with stripe 3 which represents the number of zeros represents the resistor’s value in Ohm. Stripe 4 represents the tolerance. All resistors provided by Rosslare have a 5% tolerance represented by the color Gold. To read the Resistor number, hold the unit with the gold stripe on the right. -
Page 22: Wiring Auxiliary Outputs 1 And 2
Installation Figure 8: Wiring to External Siren Inside HLX-40 This output can be programmed by the installer to provide normally closed or normally open dry contact output. This relay output toggles the normal position in case of an alarm and operates in the same method as the local siren. -
Page 23: Wiring The Wired Tamper Input
Installation This wired input acts as a regular sensor and functions likewise in armed and disarmed mode. 4.4.6 Wiring the Wired Tamper Input Wire tamper input: 24-hour active on zone 40. Figure 11: Wiring to Tamper Input 4.4.7 Wiring the HLX-40 Telephone Connectors Terminal Blocks for Line-In and Tel Line-Out Figure 12: Wiring to Telephone Connecting the MD-CC101 GSM Stick... -
Page 24: Connect The Ac Transformer
Installation To connect the MD-CC101 GSM stick: Insert the GSM stick into the connector slots located on the back of the HLX-40 see Figure 13. Tighten the placement screws on both sides of the GSM stick to secure onto the panel. Open the SIM holder by sliding it sideways. -
Page 25: Mounting The Back Plate
Installation Mounting the Back Plate 4.8.1 General To complete the installation without exposed wires, all the wiring should be done through the wall. The wiring to the back plate can be done without having exposed wires, by installing the panel on a standard electrical box, or making a hole in the wall for the wiring. -
Page 26: Dismounting The Control Panel
Installation The optimum viewing angle of the LCD is achieved when the panel is mounted above the eyelevel of the user. Figure 16: Mounting Place panel above eye level for best viewing angle Eye level Dismounting the Control Panel To dismount the control panel: Release HLX-40 from the mounted back plate by unscrewing the bottom screws and unlocking the locking hooks on the top of the back plate by lifting them up and out of the recesses on top of the panel. -
Page 27: Figure 17: Backup Battery
Installation Figure 17: Backup Battery HLX-40 Installer Manual... -
Page 28: Programming The Hlx-40
Programming the HLX-40 Programming the HLX-40 Overview We recommend that you program HLX-40 before installing it. The system must be connected to the AC power supply for programming; you may also connect the backup battery at this time. HLX-40 is provided with two default codes: ... -
Page 29: Installer Menu
Installer Menu Installer Menu The Installer’s menu enables access to the following group of options: Change code Zones Enrolling Security Communications Automation Messages Maintenance Accessing the Installer Menu Press the Menu button twice to reach the INSTALLER MENU option and press Enter. -
Page 30: Change Code
Installer Menu Change Code CHANGE CODE This option enables you to change the code with which you enter the system. The default code is 8888. To change the installer code: Press the Enter button to access the submenu. CHANGE CODE The first submenu is Enter a new four-digit installer code. -
Page 31: Enrolling
Installer Menu Once in the desired zone, use the Menu button to browse the options. Press Enter to access the desired submenu to define several characteristics as follows: Zone Type: Select one of the following: Interior Perimeter ... -
Page 32: Detectors
Installer Menu Browse the desired devices listed below to be enrolled using the Menu button and access it by pressing the Enter button: Detectors Remote controls RF Sirens Keypads Repeaters 6.4.1 Detectors You can enroll up to 39 detectors, one detector per zone, numbered 01 through 39. -
Page 33: Remote Controls
Installer Menu 6.4.2 Remote Controls You can enroll up to eight remote controls and specify functions for each button on the remote control. You can also delete enrolled remote controls. To enroll a remote control and specify a function: Select the desired remote control number 01–08 by either browsing the remotes using the Menu button or by entering the remote number using the numeric keypad. -
Page 34: Keypads
Installer Menu 6.4.4 Keypads You can enroll up to four keypads. You can choose to remove enrolled keypads. To enroll/ remov e a keypad: Select the required keypad location, #01–04 by either browsing the keys using the Menu button or by entering the keypad’s number using the numeric keypad. -
Page 35: Security
Installer Menu Security The following is a list of the system’s security features. SECURITY Exit Delay Entry Delay Auto Arming Siren Time Siren Mode Relay Polarity Local Siren Wired Siren Supervision Time Jamming No Activity Time Trouble Beeps Bypass Option Quick Arm Instant Arm Panic Button... -
Page 36: Exit Delay
Installer Menu 6.5.1 Exit Delay An exit delay enables the user to arm the system and exit the site through a specified door using a predetermined path after arming the system, without setting off an alarm. A slow-rate warning beeps sound when the system is armed. The system counts down (voice indication) the last ten seconds of the delay. -
Page 37: Siren Time
Installer Menu 6.5.4 Siren Time This specifies the amount of time the siren sounds when an alarm has been set off. The siren time is set to three minutes by default. This relates to all siren types, wired, wireless and local. To specify the siren time: Using the numeric keypad, specify the length of the siren time between 00 and 99 minutes (00 disables the siren) -
Page 38: Supervision Time
Installer Menu 6.5.9 Supervision Time The supervision time submenu specifies the time limit during which the system receives supervision reports from specified wireless devices. If a device does not report in at least once within the specified time limit, the system initiates an inactivity alert. -
Page 39: Trouble Beeps
Installer Menu 6.5.12 Trouble Beeps This parameter determines whether the system emits a “trouble beep” indicated by a series of four short beeps once a minute for the following “Trouble” events: Low battery (detectors and system) Supervision loss (detectors) ... -
Page 40: Instant Arm
Installer Menu 6.5.15 Instant Arm Enables the user to instantly arm the system by bypassing the Exit Delay; Instant Arm is set to disable by default. To enable/disable the Instant Arm option: Using the Menu button, select either Enable or Disable. Press Enter to confirm. -
Page 41: Alarm Cancel
Installer Menu 6.5.18 Alarm Cancel Specifies the amount of time during which if the user disarms the alarm, the system sends a “Cancel Alarm” message to the central station. By default, Alarm Cancel is set to 00 minutes (disabled). To set the Alarm Cancel: Using the numeric keypad, set the alarm cancel time between 01–60 minutes or 00 to disable the option. -
Page 42: Key Beeps
Installer Menu 6.5.22 Key Beeps Choose to turn key beeps on to hear a beep on each key press; by default, Key Beeps is off. To set the key beeps: Using the Menu button, select one of the following options: On to turn the key beeps on ... - Page 43 Installer Menu To set the ready option: Using the Menu button, select either Tamper, Low Battery, AC Fail, Comm Fail, Line Fail, Panic, or Supervision. Press Enter to choose the submenu. Using the Menu button, select either Enable or Disable. Press Enter to confirm.
-
Page 44: Communications
Installer Menu Communications COMMUNICATIONS System Telephone GPRS Setup Private Report CS Report Setup Line Test AC Fail Report Fax Defeat 2WV Setup Number of Rings Select Region Communication The fifth submenu is , which involves the setup of system communications parameters and settings with the outside world Browse the desired communication related setting, as described in detail below, using the Menu button. -
Page 45: Private Report
Installer Menu This menu allows you to define and setup the GPRS settings of the HLX-40 unit according to the network provider specifications. Contact your service provider for the list of parameters as defined by the cellular network provider. For detailed instructions of the PC and application setup, please refer to the HR-P02 software manual. -
Page 46: Cs Report Setup
Installer Menu Using the Menu button, choose the reporting options for each group as desired, the options are Disable, Enable, Voice Alert, Text Alert, or Both voice and text. Press Enter to confirm. The available reporting groups are: Alarms (Voice by default) ... - Page 47 Installer Menu For PABX use the digit followed by "*" and then the full number. Account Code – The number that identifies your system to the central station. The account code range is 0–9, B, C, D, E, and F. Using the alphanumeric keypad, enter a code of four digits/letters Press Enter to confirm...
-
Page 48: Line Test
Installer Menu CS Primary – Using the Menu button, select either PSTN or GSM communication types. Press Enter to confirm. CS Secondary – Using the Menu button, select either PSTN or GSM communication types. Press Enter to confirm. If the GSM stick is not installed, the Link Type is set to PSTN, and cannot be changed. -
Page 49: 2-Way Voice Behavior
Installer Menu 6.6.8 2-Way Voice Behavior The HLX-40 panel enables the CMS operator to open a 2-way voice session with the panel. The only events used in 2-way voice are: TAMPER, EMERGENCY, and ALARM/RESTORE. In general, the 2-Way Voice Behavior option is achieved via simple telephone communication. -
Page 50: Automation
Installer Menu Automation AUTOMATION Keypad Manual Set Triggers Automation The sixth submenu is , which deals with the setup of various home automation options. Browse the desired automation related setting, as described in detail below, using the Menu button. Press the Enter button to access it. -
Page 51: Messages
Installer Menu Trigger PGM Activation Remarks Options Arm Away On, Off, Pulse, Ignore Arm Home On, Off, Pulse, Ignore Disarm On, Off, Pulse, Ignore Alarm Enabled, Disabled Go OFF when alarm stops Panic Pulse, Ignore Trouble Pulse, Ignore AC Loss Enabled, Disabled ON when AC fails, OFF when AC returns... -
Page 52: House Name
Installer Menu 6.8.2 House Name This option enables you to type, record, and listen to the House Name as defined in the system. To set up and rev iew the house name: HOUSE NAME menu, use the Menu button to locate the ENTER In the HOUSE NAME submenu. -
Page 53: Maintenance
Installer Menu Maintenance MAINTENANCE Factory Default RF Test Test Indicators Test Sirens Test Devices Maintenance The eighth submenu is , which describes the various system maintenance options. Browse the desired security related setting, as described in detail below, using the Menu button. Press the Enter button to access it. 6.9.1 Factory Defaults This option allows you to restore the default factory settings for the system. -
Page 54: Rf Test
Installer Menu 6.9.2 RF Test RF testing checks the signal strength of all the wireless devices enrolled to the system. If a weak signal is detected, a repeater may be used to improve the link quality. The system saves the most recent set of RF test results for uploading. The system clears the tests when running another RF test. -
Page 55: Test Devices
Installer Menu 6.9.5 Test Devices This test checks the PGMs connected to the system. To test the PGM dev ices: Select the PGM you wish to test: PGM 1 PGM 2 Press Enter to activate the PGM for three seconds. HLX-40 Installer Manual... -
Page 56: User Menu Structure
User Menu Structure User Menu Structure The user menu enables basic user settings such as Time & Date update and user codes edit. Although the system supports up to twenty users, only one master user has access to all the settings. To enter the user menu: Press Menu until the screen displays User. -
Page 57: Reading The Event Log
Reading the Event Log Reading the Event Log The HLX-40 event log stores up to 250 events. When the log is full, the new incoming event replaces the oldest event. Events are displayed in a chronological order, and include the date and time of their occurrence. -
Page 58: Sensor Placement And Helpful Reference Tables
Sensor Placement and Helpful Reference Tables Sensor Placement and Helpful Reference Tables Default Zone Descriptions Attic Fire Main Entrance Back Door Front Yard Master Bathroom Back Yard Garage Master Bedroom Basement Garage Door Office Bathroom Gate Storage Room Bedroom Guest Bathroom Store Child’s Room Guest Room... -
Page 59: Custom Zone Descriptions
Sensor Placement and Helpful Reference Tables Custom Zone Descriptions Custom Zone Description Custom #1 Custom #2 Custom #3 Custom #4 Custom #5 Detector Deployment Plan Zone Zone Type Description Chime No Activity PGM 1 PGM 2 Remarks Yes/No Zone HLX-40 Installer Manual... - Page 60 Sensor Placement and Helpful Reference Tables Zone Zone Type Description Chime No Activity PGM 1 PGM 2 Remarks Yes/No Zone HLX-40 Installer Manual...
-
Page 61: Remote Control
Sensor Placement and Helpful Reference Tables Zone Zone Type Description Chime No Activity PGM 1 PGM 2 Remarks Yes/No Zone Remote Control Holder Name Normal Operation PGM 1 PGM 2 Status Request HLX-40 Installer Manual... -
Page 62: Reporting Codes
Reporting Codes Reporting Codes Table 8 provides a listing of the codes used to communicate with the CMS. Table 8: List of CID Codes Programmable Feature Description CID Code Burglary Event (Alarm for a zone) E130 Burglary Restore (for a zone) R130 Fire Event (Fire Alarm for a zone or from emergency button) E110... - Page 63 Reporting Codes Programmable Feature Description CID Code Low system battery Restore (Panel Low Battery) R302 AC Loss Event (Panel AC Failure) E301 AC Loss Restore (Panel AC Failure) R301 Line Failure E351 Line Restore R351 Swinger Trouble E377 Swinger Restore R377 Inaccurate Time Trouble E616...
-
Page 64: Settings Requirements For Cenelec
Settings Requirements for CENELEC Settings Requirements for CENELEC Quick Arm Enabled Jamming Enabled Tamper Enabled Low Battery Enabled AC Fail Enabled Comm Fail Enabled Line Fail Enabled Panic Enabled Supervision Enabled Memory Alarm Enabled System Status Enabled Arm Instant Enabled Event Filter 3..10 HLX-40 Installer Manual... -
Page 65: Declaration Of Conformity
Declaration of Conformity Declaration of Conformity This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -
Page 66: Limited Warranty
EMEDY OVERAGE In the event of a breach of warranty, ROSSLARE will credit Customer with the price of the Product paid by Customer, provided that the warranty claim is delivered to ROSSLARE by the Customer during the warranty period in accordance with the terms of this warranty. - Page 67 XCLUSIONS AND IMITATIONS ROSSLARE shall not be responsible or liable for any damage or loss resulting from the operation or performance of any Product or any systems in which a Product is incorporated. This warranty shall not extend to any ancillary...
- Page 68 Fax: +86 755 8610 6101 Rosslare Security Products, Inc. support.cn@rosslaresecurity.com Southlake, TX, USA Toll Free: +1-866-632-1101 India Local: +1-817-305-0006 Fax: +1-817-305-0069 Rosslare Electronics India Pvt Ltd. support.na@rosslaresecurity.com Tel/Fax: +91 20 40147830 Mobile: +91 9975768824 Europe sales.in@rosslaresecurity.com Rosslare Israel Ltd. Rosh HaAyin, Israel...
Need help?
Do you have a question about the HomeLogix HLX-40 and is the answer not in the manual?
Questions and answers