Rosslare HomeLogix HLX-40 Installation And Programming Manual page 43

Installer Menu
To set the ready option:
Using the Menu button, select either Tamper, Low Battery, AC Fail,
1.
Comm Fail, Line Fail, Panic, or Supervision.
Press Enter to choose the submenu.
2.
Using the Menu button, select either Enable or Disable.
3.
Press Enter to confirm.
4.
The ready option restricts the relevant parameters so that the system
cannot be armed during the violation of that parameter.
Example: Setting the AC Fail parameter to enable restricts the system
from being armed until the power supply returns.
To set the access level:
1. Using the Menu button, select either Memory Alarm, System Status,
or Arm Instant.
2. Press Enter to choose the submenu.
3. Using the menu button, select either Enable or Disable.
4. Press Enter to confirm.
The access level options, restricts the information actions to be accessible
to the user by pressing PIN number.
Usually system's status information is valid to the user by pressing the
Enter key. Setting each parameter to enable, the enter key should be
followed by a PIN code.
To set the ev ent filter:
1. Using the numeric keypad, specify the value for the event filter between 0
and 10 cycles.
Press Enter to save your selection.
2.
An event filter enables the user to specify the maximum repetition of a
specific event in a session. A session is a period between each of the
arming and disarming operations.
Setting the event filter to '0' enables specific events to be recorded with
no filtering to the event log.
Setting '0','1','2' value in the event filter is not compatible with CENELEC
standard.
HLX-40 Installer Manual 43