Alarm Cancel; Alarm Abort Time; Backlight Time; Hide Display - Rosslare HomeLogix HLX-40 Installation And Programming Manual

Installer Menu
6.5.18

Alarm Cancel

Specifies the amount of time during which if the user disarms the alarm, the
system sends a "Cancel Alarm" message to the central station. By default,
Alarm Cancel
is set to 00 minutes (disabled).
To set the Alarm Cancel:
1. Using the numeric keypad, set the alarm cancel time between 01–60
minutes or 00 to disable the option.
Press Enter to confirm.
2.
6.5.19

Alarm Abort Time

The system sounds a warning, but the central station does not receive
notification of the alarm if the user disarms the system within the specified
alarm abort time. This function applies to interior and/or perimeter zones only.
Alarm Abort Time
The
To set the alarm abort time:
1. Using the numeric keypad, set the alarm abort time between 01–60
seconds or 00 to disable the option.
Press Enter to confirm.
2.
6.5.20

Backlight Time

Specifies the backlight options; by default, the backlight time is set to 15
seconds.
To set the backlight:
1. Using the Menu button, select one of the following options:
 Always: to specify that the keypad and buttons are backlit at all
times.
15 secs: to specify that the keypad and buttons are backlit for up to

15 seconds after last key press.
2. Press Enter to confirm.
6.5.21

Hide Display

Enables you to specify that when armed, the system does not display the
system statuses or other system prompts; by default,
To display the sy stem status:
Using the Menu button, select one of the following options:
1.
Off to display status and prompts.

On to hide status and prompts.

Press Enter to confirm.
2.
HLX-40 Installer Manual
is set to 00 minutes (disabled).
Hide Display
is off.
41