Exit Delay; Entry Delay; Auto Arming - Rosslare HomeLogix HLX-40 Installation And Programming Manual

Installer Menu
6.5.1

Exit Delay

An exit delay enables the user to arm the system and exit the site through a
specified door using a predetermined path after arming the system, without
setting off an alarm.
A slow-rate warning beeps sound when the system is armed. The system
counts down (voice indication) the last ten seconds of the delay. The exit delay
is set at 30 seconds by default.
To specify the ex it delay :
1. Using the numeric keypad, specify the length of time for the exit delay
between 1 and 99 seconds.
Press Enter to save your selection.
2.
6.5.2

Entry Delay

An entry delay enables the user to enter the site through a specified door using
a predetermined path, without setting off an alarm. The entry delay is set at 30
seconds by default.
After entry, the user must disarm the system before the entry delay expires. A
slow-rate warning beeps sound upon detection of the specified zone/s, the
system counts down (voice indication) the last ten seconds of the delay.
To modify the entry delay :
1. Using the numeric keypad, specify the length of the entry delay between
1 and 99 seconds.
Press Enter to save your selection.
2.
6.5.3

Auto Arming

Auto Arming allows scheduled arming and disarming of the system for all
weekdays at different hours.
To activ ate auto arm:
1. Using the Menu button, select the day of the week.
2. Press Enter to confirm.
3. Using the Menu button, select one of the following options:
 Disabled
Arm Home

 Arm Away
4. Press Enter to confirm.
5. Using the numeric keys, enter the system arming time (24H).
Press Enter to confirm the time.
6.
7. Set the Alarm Duration between 1 – 9999 minutes, or enter 0 (Zero), to
disable Auto Arm Duration. (The panel remains armed until disarmed by
an authorized user.)
36 HLX-40 Installer Manual