Advertisement
it will display parameter code. Parameter code as followed table:
Category
Code
F11
F12
Temperature
F18
F19
Compressor
F21
F31
F32
Fan/
Anti-freezing
F41
F42
F43
Parameter
Setting
name
range
dew-point
temperature
10 - 45
warning point
Condensation
temperature
42 - 70
warning point
Dew-point
-20.0 –
sensor
20.0
amendment
Condensation
-20.0 –
sensor
20.0
amendment
Sensor delay
0.0 –
time
10.0
Start anti-
freezing
-5.0 –
demand
10.0
temperature
Anti-freezing
1 - 5
return difference
The second way
OFF
the output
1-3
mode.
Fan start
32 - 55
temperature
Fan close
temperature
0.5 –
return
10.0
difference.
Factory
Unit
Remark
setting
℃
It will warning
20
when the
temperature
℃
higher than the
65
set value.
℃
Amend dew-point
0.0
sensor error
℃
Amend
0.0
condensation
sensor error
Min
1.0
ute
It will start when
℃
dew-point
2.0
temperature lower
than the set value.
It will stop when
℃
dew-point
2.0
temperature
higher
F31+F32.
OFF: close fan
1. The fan under
the
control
condensation
temperature.
1
-
2. Fan worked at
the same time with
compressor.
3. Anti-freezing
output mode.
℃
It will start when
42
condensation
temperature
higher than the
℃
set value. It will
2.0
close when lower
than set return
difference.
than
of
Advertisement
