Advertisement
Refueled oil should be filtered through Cleaned funnel(Filtering precision is 14um )
The used oil should be discharged before the change of lubricant as shown in
Picture 14.
Water(Oil)
drainage valve
g) Check to see if it is necessary to discharge the condensate water in the gas
and oil barrel.(Slightly open the liquid discharge valve on the bottom of gas
and oil barrel and discharge the condensate water till the lubricating oil
flows out.)
h) Check, clean and replace the filter element of the air filter if necessary as
shown in Picture 15.
Air filter element
i) Check, clean and replace the oil-gas separator if necessary as shown in
Picture 16.
Oil-gas
separator
j) Check, clean and replace the oil filter if necessary as shown in Picture 17.
Oil filter
m) Check and clean the cooler if necessary as shown in Picture 18.
Picture 14.
Picture 15.
Picture 16.
Picture 17.
Advertisement
