1. INTRODUCTION 1.1 This Instruction manual has been written to simplify the use and maintenance of the compressor. Strict attention should be paid to the contents of this Installation, use and Instruction Manual to ensure that correct and economical use of the compressor. 1.2 Safety instructions.
2. INSTRUCTIONS FOR USE 2.1 Remove from the packaging and make sure that the unit Is not damaged in any way. If it is damaged report damage immediately and DO NOT use machine. 2.2 Fit air filter by first removing transit plug - then screw supplied air filter into compressor - Item 7 on component location chapter 9.
5.2.2 Change the oil; 5.2.2.1 Ensure machine Is on level ground. 5.2.2.2 Turn OFF using power switch (3) machine then isolate from power source. 5.2.2.3 Have a container to collect old oil, do not dispose of down any drain/s. 5.2.2.4 Remove filler knob (2) and place somewhere safe. 5.2.2.5 Open drain plug using a spanner and rotate anti-clockwise.
NOTE IMPROVEMENTS: We strive to continually Improve our products and as such we reserve the right to alter specifications, component parts and data without prior notice. IMPORTANT: No liability will be accepted for misuse of this product. 8. ELECTRICAL SCHEMATIC 9.
10. SPECIFICATIONS Model HY2550 Voltage - V Number of phases Frequency – Hz Connection method/Cable length m 3 pin plug - BS1363A Motor power hp/kw 2.5/1.865 Rated Speed (motor) – RPM 2800 Maximum Pressure - PSi/Bar 145/10 Cut-out Pressure - PSi/Bar 128/8.8 Cut-in Pressure - PSi/Bar 87/6...
12. RECYCLING Products which are labelled with the adjacent symbol MUST NOT be disposed of in household rubbish. You must dispose of packaging and old electrical and electronic equipment separately. 12.1 Disposing of packaging. 12.1.1 The packaging consists of cardboard and correspondingly marked plastics that can be recycled.