Advertisement
7. Warnings and Announcements
7.1 Power distribution for the machine
a) According to the power, voltage frequency and other characteristics of the air compressor,
select and use matched power supply and suitable power line (If conditions permit, excellent power
line with properties of anti-high temperature and anti-aging shall be equipped to avoid breakdown in
the air compressor caused by power line or power).
b) Cross area of the power line shall be no less than the data in Table 2.
Table 2. Minimum cross area of the power line (Copper wire mm
c) Proper air switch shall be selected and equipped by professional electrician according to
the power and voltage of the air compressor to protect the power electrical system for safety
guarantee, which is shown in Picture 9
d) The air compressor must be reliably grounded to avoid the dangers caused by electricity
leakage and static electricity.
e) Air compressor with large displacement shall use a separate set of power supply unit to avoid
impact on the normal operation of other equipments, or it goes against the normal operation of the
air compressor( It causes to the operation of screw protective devices)
7.2 Announcements
a) In order to avoid the damage caused by jolt during the process of storage and transportation has
been screwed when it leaves the factory. The user has to lock in the transportation fastening screw
and loosen the fasteners before using the equipments, which is shown in Picture 10
Code of the
product
HYSC75300
HYSC100300
HYSC150300
HYSC200300
Picture 9. Air Switch
Motor power
Cross area
（KW）
（mm
）
2
5.5
50
7.5
6
11
10
15
16
）
2
Advertisement
