Menu Selection; Measuring Menus; Menu Sensor Display - Ahlborn ALMEMO 2590-2 Operating Instructions Manual

9. Menu selection

9. MENU SELECTION
Via menu selection (see 8.1) it is also possible to select3 measuring menus
1. M Sensor display see 10.1
2. M Measuring points list see 10.4
3. M U1 Data logger see 10.5, 10.6 plus
4. F Function menus see 11
and 3 programming menus :
5. P Sensor programming see 12
6. P Device configuration see 13
7. P Output modules see 14
To obtain the most important device data press
key(s) : INFO
Here, if you have any questions, you can find the
exact device type together with its firmware ver-
sion, options, and serial number. Here, you can
select any sensor by pressing key(s)
and identify it on the basis of its order number (if
available). To determine the power supply re-
quirements both the battery voltage and the sen-
sor voltage can be called up. You can also obtain help at our WEB address.

10. MEASURING MENUS

In addition to the universal
(see 10.4) also offers a useful overview of all measuring channels in
list menu
combination with the most important data. Each measuring menu can, by
means of function menus, be assigned various functions; (see 11). If these
preconfigured menus do not completely meet your requirements, you can as-
semble your own user menu U1 from a range of over 50 functions; (see 10.6).

10.1 Menu Sensor display

When the device is switched on for the first time
it opens with the intelligent menu
. The first line shows the measuring point,
play
measured value, and units - in upper-case for-
mat. Below this, depending on the measuring
range, it lists all functions of importance for this
measured value, plus any further measuring
channels assigned to the connector in question.
Symbols indicate the status of the measured value; (see 8.2).
Additional measuring functions are provided via function menus; (see 11).
Symbol in the middle of the row of softkeys indicates that the measuring
<M>
point can be selected by pressing keys ▲ and ▼.
22 ALMEMO
(if available)
sensor display
Sensor dis-
® 2590
M* sensor display
M Measuring points list
M U1 Data logger
F Function menus FCT
P Sensor programming
P Device configu ration
P Output modules
INFO
ALMEMO 2590-3S
A2590-3S 6.12 Option R
Serial no. 12345607
Sensor no. 0: FHA646-2
UBat: 4.1 V
▲ / ▼
www.ahlborn.com
Mªª
(see below) the
13:
L840 flow
Temp comp
Atm pressure
03: 21.67 Pa
Mªª F © *ON
Us: 9.1 V
MENU M
measuring points
25.45 m/s
º
45.7 °C
1027 mbar
dyn pressure
MENU M ©©F FCT
©