Enable Data Formatter, Required, Keep Prefix/Suffix
Enable Data Formatter, Not Required, Keep Prefix/Suffix
Non-Match Error Beep
If Non-Match Error Beep is turned ON, the scanner generates an error beep when a barcode is
encountered that does not match your required data format.
** Non-Match Error Beep ON
Clear Data Format
There are two methods to remove data format from your scanner:
Delete one data format: Scan the Clear One barcode, a numeric barcode (0-3) and the Save barcode.
For example, to delete Format_2, you should scan the Clear One barcode, the 2 barcode and the Save
barcode.
Delete all data formats: Scan the Clear All barcode.
119
Clear All
Enable Data Formatter, Required, Drop Prefix/Suffix
Enable Data Formatter, Not Required, Drop Prefix/Suffix
Non-Match Error Beep OFF
Clear One
Enter Setup
** Exit Setup