Enter Setup
Set Terminating Character Suffix
The scanner provides a shortcut for setting the terminating character suffix to CR (0x0D) or CRLF
(0x0D,0x0A) and enabling it by scanning the appropriate barcode below.
** Terminating Character CR (0x0D)
Terminating Character CRLF (0x0D,0x0A)
To set a terminating character suffix, scan the Set Terminating Character Suffix barcode and the
numeric barcodes representing the hexadecimal value(s) of a desired terminating character and then
scan the Save barcode. Refer to Appendix 4: ASCII Table for hexadecimal values of terminating
characters. To view a setting example, see Appendix 5: Parameter Programming Examples.
Note: A terminating character suffix cannot exceed 7 characters.
Set Terminating Character Suffix
49
** Exit Setup