Program The Scanner To Get Proper Output For Russian Encoded With Utf-8; Program The Custom Transmit Delay Per Character For Febraban; Program The Custom Transmit Delay Per 12 Characters For Febraban - Newland NLS-FM50 User Manual

n. Program the scanner to get proper output for Russian encoded with UTF-8
1. Scan the Enter Setup barcode.
Scan the Set the Code Page barcode from the "Code Page" section in Chapter 2.
2.
Scan the numeric barcode "1" from Appendix 6.
3.
4. Scan the Save barcode from Appendix 7.
5. Scan the appropriate UTF-8 barcode according to the symbology your application needs from the
"Character Encoding" section in Chapter 7.
Scan the Mode 3 barcode from the "Emulate ALT+Keypad" section in Chapter 2.
6.
7. Scan the Exit Setup barcode. (If you still need to program other parameter/feature, skip this step.)
o. Program the Custom Transmit Delay per Character for Febraban
Example: Set the transmit delay per character to 5ms
1. Scan the Enter Setup barcode.
Scan the Custom Transmit Delay per Character barcode. (See the "Transmit Delay" section in
2.
Chapter 7)
Scan the numeric barcodes "0" and "5".
3.
4. Scan the Exit Setup barcode. (If you still need to program other parameter/feature, skip this step.)
p. Program the Custom Transmit Delay per 12 Characters for Febraban
Example: Set the transmit delay per 12 characters to 600ms
1. Scan the Enter Setup barcode.
2. Scan the Custom Transmit Delay per 12 Characters barcode.
section in Chapter 7)
Scan the numeric barcodes "4".
3.
4. Scan the Exit Setup barcode. (If you still need to program other parameter/feature, skip this step.)
161
(See the "Transmit Delay"