Chapter 5 Beep & Led Notifications; Startup Beep; Good Read Beep For Non-Programming Barcode - Newland NLS-FM50 User Manual

Enter Setup

Startup Beep

If startup beep is enabled, the scanner will beep after being turned on.
** Enable Startup Beep

Good Read Beep for Non-programming Barcode

Scan the appropriate barcode below to enable or disable the emission of beep when a non-programming
barcode is decoded . Beep type (frequency) and volume are also user programmable.
** Good Read Beep On for Non-programming Barcode
** Exit Setup
Chapter 5 Beep & LED Notifications
Disable Startup Beep
Good Read Beep Off for Non-programming Barcode
36