Connection - NEC Express5800 Series User Manual

Chapter 2 Preparations
2.2

Connection

Connect peripheral devices to the server. Connectors that enable a variety of peripheral devices to be
connected are provided at the front and rear of the server. Figures on the following pages show the peripheral
devices that can be connected as standard. Connect the peripheral devices before connecting the power cord
to the server.
108
Be sure to observe the following precautions to use the server safety. Failure to
observe the precautions may cause death or serious injury. For details, refer to
Safety Precautions and Regulatory Notices..
 Do not hold the power plug with wet hands.
Be sure to observe the following precautions to use of the server safely. Failure
to observe the precautions may cause burns, injury, and property damage. For
details, refer to Safety Precautions and Regulatory Notices..
 Use only the specified outlet to insert.
 Do not connect the power cord to an outlet that has an illegal number of
connections.
 Insert the power plug into the outlet as far as it goes.
 Use only the specified power cord.
 Do not connect or disconnect the interface cable while the power cord is
connected.
 Use only the specified interface cable.
Express5800/T110j-S, T110j-S (2nd-Gen) User's Guide
W ARNING
CAUTION
2. Installation and Connection