Interface Cables - NEC Express5800 Series User Manual

Chapter 2 Preparations

Interface cables

Connect the interface cable before connecting the power cord.
Important  Turn off the server and peripheral devices to be connected before
connecting.
 If you use the third party display or peripheral devices, and connect the
interface cable, contact the sales representative to check whether they can
be used.
 Direct connection from the standard serial port of this sever to the
dedicated network line is disabled. To connect to the dedicated line, be sure
to connect from the terminal device approved by the Telecommunications
Business Act (the dedicated line means the dedicated transmission path
installed by the specified users and its accessories. Generally-used public
line is also included.)
 The connectors that are not explained here are not available. Do not connect
anything to the connectors.
Express5800/T110j-S, T110j-S (2nd-Gen) User's Guide
2. Installation and Connection
109