Cases That Require Changes - NEC Express5800 Series User Manual

Chapter 3 Setup
2.4

Cases that Require Changes

Use SETUP to change a parameter in the following cases. Other than cases described below, do not change
the settings. The list of SETUP parameters and factory settings are described in Chapter 2 (1. System BIOS)
in "Maintenance Guide".
Category
Basic Change date and time
On/Off NumLock on power ON Boot  Bootup Numlock State
On/Off the function to display
the NEC logo during POST
Optional A RAID controller is installed
board
When an optional board is
installed besides the RAID
controller, set to Disabled for
Option ROM for all PCI
devices except for the boot
device.
Boot Change the boot order of
devices
Control from HW console
terminal
Boot Set to Disabled in X2APIC
Opt Out depending on the
installed OS.
Security Set a password to restrict
operation of SETUP.
Set a password to restrict
booting.
Use Trusted Boot (TBOOT)
with an optional TPM kit.
Use TPM 2.0 security new
features added in VMWare
vSphere 6.7.
Description
Main  System Date
Main  System Time
Boot  Quite Boot  Disabled
Advanced  PCI Subsystem  PCI
Express Slot n I/O ROM  Enabled
Advanced  PCI Subsystem  PCI
Express Slot n I/O ROM  Disabled
Boot  FIXED BOOT ORDER
Priorities  Change the boot priority
Advanced  Serial Port Console
Redirection  Change respective
setting.
Chipset  System Agent (SA)
Configuration  X2APIC Opt Out
Disabled
The following OSs are applicable:
－ RedHat Enterprise Linux 7
－ Windows Server 2019
－ Windows Server 2016
－ VMware ESXi 6.5
－ VMware ESXi 6.7
Security  Administrator Password
 Security  User password
Security  Password on Boot 
Enabled
Advanced  Trusted Computing
Set to Enabled in the following item:
- Security Device Support
Advanced  CPU Configuration
Set to Enabled in the following item:
- Intel Trusted Execution Technology
Chipset → PCH-IO Configuration →
Security Configuration → BIOS Lock
→ Enabled
Express5800/T110j-S, T110j-S (2nd-Gen) User's Guide
To be changed
Configurable on OS
By pressing <Esc> key,
prevent the display of the logo.
n is PCI slot number of the
RAID controller
n is PCI slot number of the
RAID controller
For details, see Installation
Guide.
After a password is set, the
entry of password is displayed
when SETUP is launched.
You can select this parameter
after you set a password.
If Intel Trusted Execution
Technology is Enabled and
the OS is started, do not
disable TPM by a TPM
management tool. If disable
TPM, Security Device
Support cannot be changed.
In such a case, Select Save &
Exit  Restore Defaults.
2. BIOS Setup Utility (SETUP)
Remark
119