NEC Express5800 Series User Manual page 94

Chapter 2 Preparations

Adding a RAID controller (N8103-205/206/207/208/210/211)
When the RAID controller (N8103-205/206/207/208/210/211) is additionally installed, and when the RAID
configuration is formed by using the RAID controller (N8103-205/206/207/208/210/211) while SAS or
SATA hard disk drive is installed, use the SATA cable attached to the 2.5-type HDD cage (N8154-82)
and additional 2.5-type HDD cage (N8154-83).
[Connecting four hard disk drives]
(N8103-205/206/207/208/210/211)
(The slot is PCI#4)
* N8103-205/210/211 does not support the N8103-209.
[Connecting six hard disk drives]
(0-3)
(4-7)
(N8103-205/206/207/208/210/211)
(The slot is PCI#4)
94
Flash backup unit control cable (provide with the N8103-209)
Flash backup unit control cable (provide with the N8103-209)
Internal SAS/SATA cable (included with N8154-83F)
* N8103-205/210/211 does not support the N8103-209.
Express5800/T110j-S, T110j-S (2nd-Gen) User's Guide
1. Installing Internal Optional Devices
(N8103-209)
Slot 4 : Fifth Hard Disk Drive
Slot 5 : Sixth Hard Disk Drive
(N8103-209)
Slot 3 : Fourth Hard Disk Drive
Slot 2 : Third Hard Disk Drive
Slot 1 : Second Hard Disk Drive
Slot 0 : First Hard Disk Drive