NEC Express5800 Series User Manual page 122

Chapter 3 Setup
Select [Server Mgmt]-[BMC network configuration].
On the following screen, select [DynamicBmcDhcp] in Configuration Address source when you use
DHCP, or configure items below Station IP address.
122
Tips
If Shared BMC LAN is enabled, Web feature, remote media/KVM feature, or command line
interface feature may be interrupted. In this case, wait for a while, and connect with network
again.
Tips
How to switch to Shared BMC LAN mode:
First step: BIOS Setup Menu → Server Mgmt → BMC network configuration
Second step: Select NCSI and Dedicated LAN → Mode2 (NCSI)
Third step: Back to BIOS Setup Menu → Save Changes and Exit
Tips
How to confirm MAC address of Shared BMC LAN:
Please see connector label on MB.
Express5800/T110j-S, T110j-S (2nd-Gen) User's Guide
3. BMC Management Console