Chapter 2 Preparations
Installation for N8181-152 Internal simple UPS
Install N8181-152 Internal simple UPS with the following procedures.
1. Mount N8181-152 Internal simple UPS to the
battery holder bracket that is accessory of N8181-
153.
2. Insert the battery holder bracket that the internal
simple UPS is mounted to the tray, then fix it with a
countersunk screw.
3. Connect the cable of the internal simple UPS (a
power cord and two signal cords) to the connector
of the control kit.
4.
Set the jumper on motherboard.
The jumper on motherboard to be configured when using internal simple UPS is shown in figure
below.
Express5800/T110j-S, T110j-S (2nd-Gen) User's Guide
1. Installing Internal Optional Devices
Countersunk
screw
85