Figure 3-1: Successful Client/Host Connection - ADLINK Technology DLAP-211-Nano Series User Manual

Host PC:
6. Connect the host PC to the client via OTG cable.
7. Open a terminal on the host PC and run this command:
# lsusb
8. Look for "NVidia Corp." in the output (an example is cir-
cled in red in the screenshot below). If found, the host
PC recognizes the client and you may proceed. If not,
double-check the OTG cable connection and perform
troubleshooting as needed until the client is recognized.

Figure 3-1: Successful Client/Host Connection

9. Download mfi_jetson-xxx-xxx-ver.xxx.tbz2 to the host
and client systems.
10.Run the following commands in the directory that con-
tains the downloaded files:
# sudo tar xvjf mfi_jetson-xxx-xxx-ver.xxx.tbz2
# cd mfi_jetson-xxx-xxx-ver.xxx
# sudo ./nvmflash.sh
28 Using the System