Preface - HSM SP 5080 Operating Manual

SP 5080

Preface

This operating manual contains detailed instructions on setting up and servicing your
new shredder and baling press combination. It also contains safety instructions which
must be observed.
Your machine will only perform to its maximum potential if you use it properly and carry
out regular and thorough maintenance. Therefore read this operating manual and the
safety instructions carefully before you fi rst start the machine and always keep it within
easy reach. This helps to prevent accidents, upholds the manufacturer's guarantee and
ensures that the machine is functional and ready for operation at all times.
HSM GmbH + Co. KG is always striving to improve its products and therefore reserves
the right to make alterations and improvements as it deems necessary. However,
this does not include an obligation for subsequent modifi cation of equipment already
delivered.
We reserve the right to make technical modifi cations which may lead to variance from
the descriptions and illustrations in this manual.
This operating manual is intended for staff assembling, operating and servicing the
machine. It contains regulations and technical drawings which may not be reproduced
in part or in full, circulated or used without authorisation for the purposes of competition,
or passed on to third parties.
If you have any queries after reading this operating manual, please contact your
authorised dealer.
2.993.999.520_en
7
09/2015