6
Storage
If the shredder and baling press combination has to be put into storage for a longer period of
time, make sure that:
•
The shredder and baling press combination is disconnected from the power supply
•
The shredder and baling press combination is not directly exposed to the weather
•
The hydraulic tank, pipes and hoses have no leaks
7
Disposal information
HSM baling presses and shredders have a long service life. Nevertheless, every machine
reaches a time when inspections and repairs are no longer worth the trouble. The operator
then faces the problem of disposing of the machine properly.
We will be glad to advise you about the legal regulations for disposal at the appropriate time.
The baling press and shredder are made of various materials and must therefore be
dismantled for recycling separately. (Ferrous materials, electrical parts, plastics).
The hydraulic tank, pipes and hoses must be emptied. Make sure that overfl owing or sprayed
fl uids are cleared up with suitable bonding agents or technical equipment and are not able to
penetrate water, the ground or the drainage system.
Observe the national legal regulations for the removal of the respective hydraulic fl uids.
09/2015
2.993.999.520_en
SP 5080
53