1.5
Inspecting the safety devices
Check the safety devices:
• At the start of each shift (if operation was interrupted)
• At least once a week in case of continuous operation
• Following any maintenance or repair
Ensure that the safety devices are:
• In the prescribed condition
• In the prescribed location
• Firmly attached
• Functioning properly
Use the following check list for your inspection. Correct any defects before starting
the machine.
If any defects arise during operation, stop the machine immediately and ensure that
the defect is corrected.
Do not modify or remove any of the safety devices. Do not deactivate any of the safety
devices by modifying the machine.
Modifi cations to the machine are prohibited for safety reasons.
12
2.993.999.520_en
SP 5080
09/2015