Oil Reservoir Empty; Stopping The Machine; Outdoor Operation - HSM SP 5080 Operating Manual

4.7.4

Oil reservoir empty

• "Oil reservoir empty" display lights up blue.
- Top up with special lubricating oil for the cutting head.
Order no. 1.235.997.500 for 5 l container
• The "Oil reservoir empty" signal is automatically deactivated after the reservoir is fi lled up.
4.8

Stopping the machine

- Put the machine into the initial position (press ram at the rear)
- Turn off the main switch on the shredder and baling press
- Secure the main switch against restarting
- Disconnect the red CEE power plug
4.9

Outdoor operation

See also the "Siting the machine" chapter
46
Note
The shredder remains operational even when the oil reservoir is empty.
Warning!
For reasons of safety, only operate the machine under strict supervision.
The operator must ensure that unauthorised people do not gain access
to the machine.
When the machine is not being used, it must be shut down and secured
against unauthorised use.
2.993.999.520_en
SP 5080
09/2015