Delivery, Storage And Unpacking - cytiva Sepax C-Pro Operating Instructions Manual

4.2.1

Delivery, storage and unpacking

Introduction
This section describes the requirements for receiving the delivery box and storing the
instrument before installation.
Delivery
The Sepax C-Pro system is shipped inside a single cardboard box.
Cytiva local representatives will install and verify the system for the first time.
Receiving the package
• If there are any visible damages on the delivery box, record this on the receiving
documents. Inform Cytiva local representative of such damages.
• Move the delivery box to a protected location indoors, which complies with the
storage requirements in
Note:
Contents of the package
The following illustrations show the contents of the package:
Sepax C-Pro Operating Instructions 29350570 AE OM-3074
WARNING
Ensure you read the warnings and precautions section of this
manual before attempting to move the instrument.
WARNING
Heavy object. The delivery box weighs about 20 kg. At least two
people are required to lift the box.
Environmental conditions, on page
In case of any doubts about the correct functioning of the system, consider it
unsuitable for use and contact the manufacturer or an authorized local
representative in order to clarify the possibility of using it for its intended
purpose. In the presence of visible damage, do not use the system.
4 Installation
4.2 Site preparation
4.2.1 Delivery, storage and unpacking
160.
59