Electrical Connections - cytiva Sepax C-Pro Operating Instructions Manual

4.3

Electrical connections

Introduction
This section shows the electrical connections that must be made to the system. If the
system is moved within the lab or to another building, the system has to be recon-
nected to electrical power and network (optional).
Connect power to the instrument
Connect the power cord from the Sepax C-Pro instrument to a grounded wall outlet.
Recommended use of the USB ports
Sepax C-Pro Operating Instructions 29350570 AE OM-3074
WARNING
Power cord. Only use power cords with plugs delivered or
approved by Cytiva.
WARNING
Protective ground. To reduce the risk of electric shock, this
equipment must always be connected to a grounded power outlet.
NOTICE
Observe the below configuration when installing peripherals.
4 Installation
4.3 Electrical connections
69