Authentication Settings - cytiva Sepax C-Pro Operating Instructions Manual

6.3.2

Authentication settings

Introduction
This section provides instructions for changing the authentication settings.
Note:
Enable Auto-logoff activation
To automatically log out users after a period of inactivity, enable Auto-logoff activa-
tion. If enabled, the user is logged out after the time set in Inactivity timeout.
Note:
Note:
Follow the steps below to enable Auto-logoff activation.
Step
1
2
Set Inactivity timeout
The Inactivity timeout option, sets the time of system inactivity after which a user
can be logged out.
Note:
Follow the steps below to set the Inactivity timeout.
Step
1
2
3
Max login attempts
The Max login attempts option determines the maximum number of attempts for the
login of a user after which the user account is suspended.
Sepax C-Pro Operating Instructions 29350570 AE OM-3074
Changing the authentication settings affects the security of the product. It is
the end-user's responsibility to make sure that valid parameters are entered
to meet the desired level of protection.
If Auto-logoff activation is disabled, the time set in Inactivity timeout is
not applicable.
During a procedure, the system does not log out a user, even if Auto-logoff
activation is enabled and Inactivity timeout has passed.
Action
From the Home menu, tap Menu →Settings →Authentication.
Tap Auto-logoff activation to enable.
During a procedure, the system does not log out a user, even if Auto-logoff
activation is enabled and Inactivity timeout has passed.
Action
From the Home menu, tap Menu →Settings →Authentication →Inac-
tivity timeout.
Enter a value between 30 and 9999 seconds.
Tap Save.
6 Operation GMAP 6.0
6.3 Changing settings
6.3.2 Authentication settings
115