Managing Applications - cytiva Sepax C-Pro Operating Instructions Manual

6.5

Managing applications

Introduction
This section provides instructions on how to install and uninstall an application, and
repair the software.
Install an application
Follow the steps below to install an application.
Step
1
2
3
4
5
6
Uninstall an application
Follow the steps below to uninstall an application.
Note:
Step
1
2
Sepax C-Pro Operating Instructions 29350570 AE OM-3074
Action
Insert a USB flash drive into one of the USB ports of the instrument.
Result:
New software ready to be installed is displayed, in the Package manager
menu, highlighted in light blue.
From the Home menu, tap Menu →Package manager.
Select the application of choice and tap Install.
Result:
A confirmation prompt appears showing application name and version.
Tap OK to continue the installation.
Enter the activation code provided on the back of the USB box, by using the
on-screen keyboard or scanning the barcode.
Tap Validate to confirm.
Note:
If you enter an incorrect code three times, the installation is canceled.
Contact Cytiva for support.
It is not possible to uninstall Test Applications and the Purge Mode appli-
cation since they are part of the system software.
Action
From the Home menu, tap Menu →Package manager.
Select the application of choice and tap Uninstall.
Result:
A confirmation prompt appears showing the application name and version.
6 Operation GMAP 6.0
6.5 Managing applications
122