Changing The Control Panel Settings; Timer Program To Control The Room Temperature; Creating A Timer Program - REMEHA Gas 320 Ace Installation And User Manual

Menu
Time programs heating
Zone configuration
Tab.75 Extended menu to configure a heating circuit Zone configuration
Menu
Short temperature change
OperatingZoneMode
Manu ZoneRoomTempSet
Holiday Mode
Zone friendly Name
Icon display zone
11.4

Changing the control panel settings

Tab.76 Control panel settings
System Settings menu
Set Date and Time
Select Country and Language
Daylight Saving Time
Installer Details
Set Heating Activity Names
Set Screen Brightness
Set click sound
License Information
11.5

Timer program to control the room temperature

11.5.1

Creating a timer program

7734324 - v.07 - 21092022
Function
Set and configure the time programs used when in operating mode
Scheduling.
Configure the settings of the zone circuit.
Function
Change the room temperature temporarily, if required.
Select the heating operating mode: Scheduling, Manual.
Set the room temperature manually to a fixed setting.
Set the start and end date of your holiday and the reduced temperature for
this zone.
Create or change the name of the heating circuit.
Select the icon of the heating circuit.
You can change the control panel settings within system settings.
> System Settings
Use the rotary knob to navigate.
Use the
1. Press the button.
2. Select System Settings
3. Perform one of the operations described in the table below:
Settings
Set the current date and time
Select your country and language
Enable or disable daylight saving time. When enabled daylight saving time will
update the systems internal time to correspond with summer and winter time.
Read out the name and phone number of the installer
Create the names for the activities of the timer program
Adjust the brightness of the screen
Enable or disable the click sound of the rotary knob
Read out detailed license information from the device platform application
A timer program allows you to vary the room temperature per hour and per
day. The room temperature is linked to the activity of the timer program.
You can create up to three timer programs per zone. For example, you
can create a program for a week with normal working hours and a
program for a week when you are at home most of the time.
Select zone > Time programs heating
Use the rotary knob to navigate.
Use the
1. Select the tile of the zone you want to change.
2. Select Time programs heating.
button to confirm your selection.
.
button to confirm your selection.
11 User instructions
79