To Install "Nvidia Nforce2 All-In-1 Driver - SOLTEK B7A-F User Manual

B7A-F

3-2 To Install "nVIDIA nForce2 All-in-1 Driver"

1. Before opening the Support CD, please update Windows 2000 or
Windows XP with the latest Service Pack. Otherwise, the installation
of USB2.0 driver will not take effect.
2. Following the procedures of opening
the Support CD, click to " Install
nVIDIA nForce2 All-in-1 Driver" to
proceed.
3.The nVIDIA InstallShield Wizard will pop up to guide you to set up
nForce2 Drivers. This All-in-1 Driver will first start to install GART
Driver.
4.The nVIDIA InstallShield Wizard will
get on installing GART Driver.
5.The nVIDIA InstallShield Wizard will
get on installing memory controller
Driver.
6.The nVIDIA InstallShield Wizard will
get on installing system management
bus Driver.
44
kÉñí