Table of Contents
Advertisement
Cello Installation Guide
MAN-CELIG (Ver. 1.5)
1.3
Directives and Standards
The Cello conforms to the following industry safety standards:
Safety Standard
In compliance with UL508c
In compliance with UL840
In compliance with UL60950
(formerly UL1950)
In compliance with EN60204-1
The Cello servo drive has been developed, produced, tested and documented in
accordance with the relevant standards. Elmo Motion Control is not responsible for
any deviation from the configuration and installation described in this documentation.
Furthermore, Elmo is not responsible for the performance of new measurements or
ensuring that regulatory requirements are met.
1.4
CE Mark Conformance
The Cello servo drive is intended for incorporation in a machine or end product. The
actual end product must comply with all safety aspects of the relevant requirements of
the European Safety of Machinery Directive 98/37/EC as amended, and with those of
the most recent versions of standards EN60204-1 and EN292-2 at the least.
According to Annex III of Article 13 of Council Directive 93/68/EEC, amending
Council Directive 73/23/EEC concerning electrical equipment designed for use within
certain voltage limits, the Cello meets the provisions outlined in Council Directive
73/23/EEC. The party responsible for ensuring that the equipment meet the limits
required by EMC regulations is the manufacturer of the end product.
1.5
Warranty Information
The products covered in this manual are warranted to be free of defects in material
and workmanship and conform to the specifications stated either within this
document or in the product catalog description. All Elmo drives are warranted for a
period of 12 months from the time of installation, or 18 months from time of shipment,
whichever comes first. No other warranties, expressed or implied — and including a
warranty of merchantability and fitness for a particular purpose — extend beyond this
warranty.
Item
Conformance to the following safety standards:
Power Conversion Equipment
Insulation Coordination, Including
Clearance and Creepage Distances of
Electrical Equipment
Safety of Information Technology Equipment,
Including Electrical Business Equipment
Low Voltage Directive, 73/23/EEC
Safety Information
1-3
Advertisement
Table of Contents
