Cello Installation Guide
MAN-CELIG (Ver. 1.5)
Chapter 3: Installation
3.1
Before You Begin
3.1.1 Site Requirements
You can guarantee the safe operation of the Cello by ensuring that it is installed in an
appropriate environment.
Feature
Ambient operating temperature
Maximum operating altitude
Maximum relative humidity
Operating area atmosphere
Models for extended environmental conditions are available.
The Cello dissipates its heat by natural convection. The maximum
operating ambient temperature of 0 °C to 40 °C (32 °F to 104° F) must not
be exceeded.
3.1.2 Hardware Requirements
The components that you will need to install your Cello are:
Component
Main Power Cable
Motor Cable
Back-up Supply Cable
(if needed)
Value
0 °C to 40 °C (32 °F to 104 °F)
10,000 m (30,000 ft)
90% non-condensing
No flammable gases or vapors permitted in area
Described in
Connector
Section
VP+ PR
M1 M2 M3
24v
3.4.2.2
3.4.2.1
3.4.3
3-1
Diagram