Table of Contents
Advertisement
8. Press
or
to select a cell to input the subnet mask.
9. Press the 0 to 9 key to input a part of the subnet mask in the cell.
10. Repeat steps 9 and 10 to input the subnet mask in the cells.
11. Press
to select the [Default Gateway] field.
12. Press
or
to select a cell to input the default gateway.
13. Press the 0 to 9 key to input a part of the default gateway in the cell.
14. Repeat steps 13 and 14 to input the default gateway in the cells.
15. Press the Enter key to confirm the settings.
The following screen appears.
If the input value is incorrect, the message "Invalid value(s)." appears. The color
of the incorrect value changes to red.
16. Press the
key to go back to the main screen.
Connecting to the Communication Unit
To connect the handset with the communication unit, do the following:
1. In the [Admin Settings] menu, press
the Enter key.
2. Press
to select the [Comm. Unit IP] menu, then press the Enter key.
The [Comm. Unit IP] screen appears.
3. Press
or
to select [Auto] or [Manual].
For [Auto], go to step 9. For [Manual], go to step 4.
4. Press
or
to select the [IP Address] field.
5. Press
or
to select a cell to input the IP address. This address must match the
Communication Unit's IP address.
6. Press the 0 to 9 key to input a part of the IP address in the cell.
7. Repeat steps 5 and 6 to input the IP address in the cells.
3. SETTINGS FOR IP HANDSET
to select the [Network] menu, then press
3-13
Advertisement
Table of Contents
Troubleshooting
