How To Search For A Contact - Furuno FELCOM501 Operator's Manual

2. IP HANDSET OPERATIONS
5. Input a name of a party, then press the Enter key.
You can use a maximum of 20 characters. For how to input the name, see
section 1.5.2.
6. Press
7. Input a phone number, then press the Enter key.
You can use a maximum of 28 numbers. The available characters are numerics,
*, +, and . (period). For how to input the number, see section 1.5.2.
8. Press
9. Input a speed dial number* if required, then press the Enter key.
Speed dial numbers can range from 10 to 200.
For how to input the number, see section 1.5.2.
*: Once registered, speed dial numbers allow you to dial a number using an ab-
breviated number. This feature is handy when assigned to regularly used num-
bers.
10. Press
The message "Wait response..." and "Applied." appear, then the contact is saved
in the Communication Unit.
11. Press the
2.2.2

How to search for a contact

This section explains how to search for a contact from the [Contacts] list.
1. Press the
2. Press the
3. Press
4. With the [Input Name or Number.] field selected, press the Enter key.
5. Input a part of a name (or phone number), then press the Enter key.
2-10
or to select the [Number] field, then press the Enter key.
or to select the [Speed Dial] field, then press the Enter key.
to select [Add], then press the Enter key.
key to go back to the main screen.
key to open the [Contacts] list.
key to open the sub-menu.
or to select the [Search] menu, then press the Enter key.