Prefix Settings - Furuno FELCOM501 Operator's Manual

2. IP HANDSET OPERATIONS
3. Select an event to view the complete information.
Press the
4. Press the
2.6

Prefix Settings

You can set the sound quality and the caller code for each outgoing call.
1. At the [Call] screen, press the
2. Press
3. With the [Sound Quality] field highlighted, press
ity.
• [Auto]: Automatically changes the voice service.
• [Standard]: Uses the standard 4kbps AMBE+2 service.
• [High]: Uses the 3.1kHz service.
Note: If you select [High], the communication costs will be expensive.
4. Press
If [Caller Code] is set to [No Request], this field appears is in gray. See "How to
set the request of the caller code" on page 3-18.
5. Press the 0 to 9 key to input the caller code (access code).
The caller code can range from 10000 to 99999.
6. Press
2-20
key or key to return to the event log screen.
key to close the event log screen.
to select [Add Prefix], then press the Enter key.
or to select the [Access Code] field.
or to select the [OK], then press the Enter key.
Date and time of event
Event code
Event contents
Recommended action
key.
or to select the desired qual-