Furuno FELCOM501 Operator's Manual page 130

6. SETTINGS ON WEB INTERFACE
9. Click [Add user] button.
10. Referring to the following table, set up the user for using the WAN connection.
Input the IP address of the network equipment to enable data communication. If
an IP address of an IP Handset is not registered as "User" here, "No permission"
appears on the main screen of the IP Handset. If an IP address of a PC is not reg-
istered as "User" here, "No permission" appears on the [Dashboard] screen of
theWeb interface.
Item
User
Save button
Cancel button Cancel the setting information.
When clicking the [Save] button, the user is added to the user list as follows:
To edit the created user, Click the [Edit] button.
Edit the user, referring to the table at this step.
6-20
Input, or change IP address.
The assigned IP address must be different from that of the Communi-
cation Unit. Further, the addresses 127.0.0.1 and 255.255.255.255
cannot be used.
Note: The same IP address cannot be registered to the different
groups. "192.161.0.*" and "192.168.0.10" can be registered. (* indicates
a wild-card). If you registered two groups this way, the group having the
narrowest range (192.168.0.10) has priority.
Save the setting information.
Description