Furuno FELCOM501 Operator's Manual page 185

Code Priority
0x1700 Warning
0x1800 Warning
0x2000 Info
0x2900 Warning
0x3900 Warning
0x4000 Info
0x8009 Warning
0x802F Error
0x8030 Error
0x8031 Error
Notification Message
BDU Web UI
Registration for Registration for
voice service failed. voice service failed.
Registration for Registration for data
data service failed. service failed.
Weak satellite sig-
nal.
Found network is Found network is
not a valid BGAN not a valid BGAN
network. network.
DSP in Communi- DSP has detected
cation Unit has de- some error(s).
tected error(s).
DSP in Communi-
cation Unit has de-
tected a suspicious
condition.
Antenna unit is Antenna unit is off
turned off because because of low input
input voltage to voltage.
Communication
Unit is too low.
Antenna start up Antenna start-up
failed. failed.
Antenna start up Antenna start-up
failed. failed.
Antenna start up Antenna start-up
failed. failed.
APPENDIX 3 NOTIFICATION MESSAGES
Explanation/Remedy
Handset
Registration for voice service
failed. If the problem persists,
contact your SIM provider.
Registration for data service
failed. If the problem persists,
contact your SIM provider.
- The signal from the satellite
is weak. Make sure the an-
tenna has a clear line of sight
to the satellite(s). Also, con-
firm that the selected satellite
is correct.
Found network is not a valid
BGAN network. Restart the
Communication Unit. If the
problem persists, contact
your dealer.
DSP in Communication Unit
has detected error(s).This
can be caused by H/W error
or interference. If there is no
interference and the problem
persists, contact your dealer.
- DSP in Communication Unit
has detected a suspicious
condition. If any communica-
tion error happens and per-
sists, contact your dealer.
Antenna Unit is turned off be-
cause input voltage to Com-
munication Unit is too low.
Ensure a stable power sup-
ply to the Communication
Unit.
Antenna start up failed be-
cause the software failed to
load. Restart the Communi-
cation Unit. If the problem
persists, contact your dealer.
Antenna start up failed be-
cause the system cannot ac-
tivate the main application
mode. Restart the Communi-
cation Unit. If the problem
persists, contact your dealer.
Antenna start up failed be-
cause the system cannot ac-
tivate the normal operation
mode. Restart the Communi-
cation Unit. If the problem
persists, contact your dealer.
AP-9