How To Register/Edit Wan Group As "Router Mode - Furuno FELCOM501 Operator's Manual

6.8.1

How to register/edit WAN group as "Router mode"

Router mode is the more common of the connection types, allowing data transfer and
automatic connection at startup. You can also manually connect from the WEB inter-
face, as well as from a handset.
1. Referring to section 6.1, login as an Administrator.
2. Click [Admin], [Network Settings], [WAN], then [Groups].
3. Click [Add group].
The following pop-up window appears.
To edit a WAN group, click the [Settings] button for the WAN group to edit. Edit
the settings referring to this step and later.
4. Referring to the following table, set up the connection type and the group name.
Item
Connection Type
Group name
Next button
Cancel button
Select "Router mode".
Input the group name.
Go to the next step.
Close the pop-up window.
6. SETTINGS ON WEB INTERFACE
Description
6-17