Furuno FELCOM501 Operator's Manual page 189

Code Priority
0x9223 Warning
0x9628 Warning
0x9629 Warning
0x962A Warning
0x962B Warning
0x962C Warning
0x962D Warning
Notification Message
BDU Web UI
Unexpected HPA Unexpected HPA
voltage in the An- voltage in the Anten-
tenna is detected. na is detected.
The Antenna tem- The Antenna tem-
perature is too high. perature is too high.
ACM voltage in the ACM voltage in the
Antenna is out of Antenna is out of
range. range.
Communication er- Communication er-
ror between Com- ror between Comm.
munication Unit and Unit and ACM in An-
ACM in Antenna. tenna.
MSU in Antenna er- MSU in Antenna er-
ror. ror.
Communication er- Communication er-
ror between Com- ror between Comm.
munication Unit and Unit and ATR in An-
ATR in Antenna. tenna.
Lost connection to Lost connection to
the GPS receiver or the GPS receiver or
GPS fixed lost. GPS fixed lost.
APPENDIX 3 NOTIFICATION MESSAGES
Explanation/Remedy
Handset
Unexpected HPA voltage in
the Antenna is detected. Re-
start the Communication
Unit. If the problem persists,
contact your dealer.
The Antenna temperature is
too high. Turn the system off
until the Antenna tempera-
ture cools down.
ACM voltage in the Antenna
is out of range. Check input
voltage to the Communica-
tion Unit is within 10 – 32 V
DC. Make sure the antenna
cables are screwed together
firmly.
Communication error be-
tween Communication Unit
and ACM in Antenna. Check
the Antenna cable connec-
tion.
MSU in Antenna error. Re-
start the Communication
Unit. If the problem persists,
contact your dealer.
Communication error be-
tween Communication Unit
and ATR in Antenna. Restart
the Communication Unit. If
the problem persists, contact
your dealer.
Lost connection to the GPS
receiver or GPS fixed lost.
Restart the Communication
Unit. If the problem persists,
contact your dealer.
AP-13