Furuno FELCOM501 Operator's Manual page 134

6. SETTINGS ON WEB INTERFACE
5. Click the [Next] button.
6. Referring to the following table, set up the PPPoE connection settings and choose
a service name.
Item
Connection Type
Group Name
Connection List
PPPoE Username
PPPoE Password*
Password(Confir-
3
mation)*
Data connection
service
Header Compres-
sion
Prev button
Next button
1
* : Memorize the Username and Password set here, as they are required to con-
nect to the internet via PPPoE.
2
* : FELCOM501 only.
3
* : The message "Invalid value(s)" appears under the following circumstance, af-
ter the [Next] button is clicked.
• Invalid characters using in the user name or password.
• Number of characters used for the user name or password is more than the
maximum, or less than the minimum.
• The combination of characters does not meet the requirement.
6-24
Shows "PPPoE".
Shows the registered group name.
Input the user name*
than space, ", . Maximum of 15 characters.
3
Input the password*
than space, ", . The password must contain upper and lower-
case alphanumeric characters with a minumim of 8 characters
and a maximum of 15 characters.
Re-Input the password entered at PPoE Password.
Select the service from "Standard Data", "Streaming 8kbps",
"Streaming 16kbps", "Streaming 32kbps", "Streaming 64kbps",
"Streaming 128kbps", "Streaming 256kbps"*
Put a [ ] in the box to activate the header compression.
Compress the header area of the communication protocol, and
reduce the communication volume.
Return to the previous step while keeping the setting information.
Go to the next step.
Description
1
for PPPoE. Use ASCII characters other
1
for PPPoE. Use ASCII characters other
2
.